Hi everyone… just purchased a new 6 tap fridge for beers on tap… beers are fine… but also want to have coke on tap… tried having higher pressure 30psi… bit all I get from the tap is foam and then flat coke… worse still… flat scotch and coke…
Has anyone successfully been able to get a tap to work for mixed drinks… love to have beers… spirits and soft drinks all next to each other on the 6 taps…
Thanks in advance… I will try whatever it takes to get it going…
You probably need to use a much longer line, flow restrictors or a much narrower line to do soda. Some people use duo-tight connectors with narrower lines. I use epoxy mixers in the line to achieve the desired back pressure, but if I started over I would try the duo-tight.
Sodas are served at much higher pressure than beer so you will need a dual regulator. As was mentioned, you will need some sort of restriction on the soda line to keep it from pouring too fast. A longer line can work or some other type of inline restrictor.
Not quite the same but I keep sparkling water on tap. I carb at 30 and dispense at 20. I have twelve feet of line coiled up. I’m not sure if the ph or gravity of soda would make a difference.