Finished my keezer this week. It isn’t all fancy like some on this forum, but it was cheap. Many thanks to Breckenridge Brewery for supplying the 10% AHA Discount on the 1st keg.
I can’t figure out how to post a photo here, but I guess you can see it on my blog at www.onbeer.blogspot.com…sorry to plug my sorry assed blog here, but I am just pretty proud of my efforts.
If you quote this post, you’ll see the img tags and how they’re used . . .
[quote]If you quote this post, you’ll see the img tags and how they’re used . . .
[/quote]
Thanks for posting this for me Tom…but I still don’t get how to insert the image between the img thingys and don’t see it included above…everything I try doesn’t do the trick…as in drag in or copy or copy the url in…
Hey, I think it’s pretty… It delivers home brew at the right temperature right? That makes it pretty, period.
OK, in order to post a picture you need to find where it lives on the web, in this case your blog, then you right click on the picture and copy it’s address… Then you click on the image icon you see when you make a post here… above the smiley’s second from the left, and paste the address between the two center brackets… like so: (and i’m using accolades for illustration, if I used brackets it would think it was a picture…)
{img}address of the picture{/img}
Hope this helps…
Thanks. I think that the answer is that when I was trying to post pictures I didn’t yet have them on my blog…I will try again soon with other stuff you all may be interested in.
Also, question: I know what too short of a beer line does to the pour (foam), what does slightly too long do? I can live with it taking some extra time, but does it affect the quality or create foam problems? How do I know my 8 ft. of line is perfect?
I have a problem with the first pour of the day…(the beer in the faucet, shank, and hose). That pour is always foamy. The second pour (if done in succession) is much, much better, and the third is nearly perfect. Any suggestions from the more experienced peanut gallery?
Many Thanks.
It can slow it down, you’ll know 8 feet is perfect when it pours a pint the way you like it.
The reason it pours foamy for the first beer is because the shank and faucet are warm. The beer warms up and releases CO2 as it passes through. But the beer also cools the shank and faucet, so subsequent pours are not foamy.
You can either dump the first few ounces and get a nice pour, or just know it will be foamy at first. I just accept the foam 
Yup, let the foam settle for a few moments, top it off. One of the ways to minimize this problem is to have a long shank, longer than you think you need. The piece of it in the fridge cools down, and conductivity helps cool down the tap. I can touch mine and they actually feel perceivably colder than ambient temperature.
I was thinking that I would run the excess line down the side of the freezer in contact with the walls with the coils, or connect the shank to the wall with some copper, just to conduct cold from down low to the metal shank. Alternately, a small fan to move cold air up into the top…the fan would take some purchase and more wiring…I think I will try the first idea (but my line may freeze when the keezer is running). The situation may also improve with the addition of more kegs (thermal mass)…more beer is always the answer, isn’t it?
Be careful with that, I have had frozen beer lines from the lines being too close to the freezer sides. Another data point, I run 15 foot beer line for each tap. My first pour and subsequent pours are perfect. I simply coil them up neatly and use zip ties to keep them that way.
It’s functional and that’s really all that matters. I am in the process of converting my chest freezer and was planning to do the same thing. Keep the CO2 outside and run a manifold for two taps. Currently I am just using a cobra tap in there, I will get around to finishing it someday…
For a cheap and easy drip tray I was planning to borrow this idea. Get a stainless drywall mud pan and seal the seams with silicone so it wont leak and attach it to the freezer with velcro tape.
If you’re worried about too much foam from the first beer, use a pitcher.
looks pretty to me. you should see mine!
Looks like it will do the job to me.
Very Nice!
Looks fine to me. Beauty is in the eye of the beer holder…
I am certainly not going to post pictures of mine. I have 8 c-kegs all crammed into a chest freezer, each one with a picnic tap attached. Not all pretty like yours is.
The sheer number of kegs makes it pretty.
Plus it’s fun to blend them.
I need to drink up - I’ve got a keg of Rye IPA waiting its turn.
Thanks for reminding me, I’ve been meaning to brew a Rye IPA for a while.