Selling system for $1,000.00
This system comes with everything for you to setup, plug-in, and brew your 10 gallon finished volume beer, sans fermenter. There has been a lot of work done to make this system as efficient as possible. (Read you use less grain, which costs you less.) I have been able to get 93% system efficiency as my highest. The average is ~ 80-85%. Using rice hulls does help increase it to 90-ish percent.
All connections are cam lock for easy disassembly and cleaning. All cam lock high temperature silicone washers have been replaced within the last year and are in great condition.
As I wrote up this breakdown list, I was pricing out all the parts to help properly price the system. You are getting this system well below cost. I fully expected to never recoup the investment, but I have priced it to sell for a good discount.
• Stainless Steel 15 Gallon Keggle
o x3 – Welded Stainless steel male cam lock port
x2 – Bottom port
x1 – Middle port
o x1 – Stainless steel T-connector
x1 – Stainless steel female cam lock
x1 – Graduated volume tube
x1 – Dial thermometer
x1 – Removable heat shield to protect thermometer
o x2 – 304 Stainless steel ball lock valve for bottom exit and middle entry ports
x1 – Stainless steel female cam lock per valve
x1 – Stainless steel male cam lock per valve
x1 – Removable heat shield to protect bottom valve
o x2 – Dip tubes
x2 – Stainless steel 1/2in compression fitting dip tubes
x2 – Stainless steel female cam lock
x2 – Stainless steel male cam lock
x2 – Stainless steel 1/2in NPT 90d elbow
x2 – Stainless steel 1/2in NPT 45d elbow
x2 – Stainless steel 1/2in NPT hex nipple
• Blichmann Burner
• Propane Tanks
o x1 – 3/4 Full
o x1 – Empty
• Chugger Pump
o x1 – Stainless steel 3/4in to 1/2in NPT reducer
o x2 – Stainless steel male cam lock
o x1 – 304 Stainless steel ball lock valve for exit port
x1 – Stainless steel female cam lock
x1 – Stainless steel male cam lock
• Mash Tun
o Custom drilled with support PVC insert and sealed with aquarium adhesive (food grade)
This work was done to support the compression the ball valve requires to be secured.
o x1 – 304 Stainless steel ball lock valve for exit port
x1 – Stainless steel female cam lock
x1 – Stainless steel male cam lock
o x1 – 304 Stainless steel spring for lauter/filter
x1 – Stainless steel male cam lock
o x1 – ~ 5ft High temperature silicone tubing for draining
x1 – Stainless steel female cam lock
x1 – Stainless steel 1/2in barb to NPT thread
o x1 – 1gal Plastic pitcher
o Previous iteration of lauter/filter braids
x1 – 1in Toilet braid over a 1/2in boil screen
x1 – 1/2in Toilet braid
• Keggle Hop/Additions Filter Basket
o 300 micron screen
o 6in Diameter
o 14in Height
o Hook
4in Height
2in Outward extension
1in Downward hook
• Immersion Chiller
o x1 – 50ft Copper immersion cooling coil
o x1 – Brass garden hose male connector
o x1 – Brass garden hose female connector
x1 – Plastic garden hose male quick disconnect
• Grain Mill
o Adjustable gapping
o 5lb Grain hopper
o Wood base
Sits flush over 6.5gal fermenter or 5gal bucket
• Water Filter
o x1 – Water filter housing
o x1 – Carbon filter
o x1 – Plastic garden hose female quick disconnect
o x1 – Plastic garden hose male quick disconnect
• Garden Hoses
o x1 – 50ft No-kink hose
x1 – Plastic garden hose female quick disconnect
x1 – Plastic garden hose male quick disconnect
o x1 – 15ft hose
• Silicone Tubing
o x2 – ~ 8ft High temperature silicone tubing
x2 – Stainless steel female cam lock
x1 – Stainless steel 1/2in NPT 90d elbow
o x2 – ~ 8ft High temperature silicone tubing
Spare, unused
• Cam Lock Caps
o x4 – Stainless steel cam lock caps
• Power Drill (for Grain Mill)
o Corded, 1/2in Heavy Duty, Reversible, Variable drive drill
• Electrical Extension Cord
o x1 – 50ft Electrical extension cord
• Electrical Surge Protector
• Folding Table
Pictures from a brew day 3 or 4 years ago. A few items have been updated since then.