# Vent-Matic Ultra Flo Faucets | Product Review **URL:** \ **Category:** General Homebrew Discussion\ **Created:** [October 1, 2015, 12:01pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177 "2015-10-01T12:01:44Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![brulosopher](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/brulosopher/32/12585_2.png) [@brulosopher](https://forum.homebrewersassociation.org/u/brulosopher)\ **Post date:** [October 1, 2015, 12:01pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/1 "2015-10-01T12:01:44Z")
There are few things I see value in spending top dollar on, as I’ve found I can usually pay less for items of equal or even better quality just without the big name attached to it. But then there are those things where price does seemed to be correlated with quality, and for those who keg, faucets are certainly one of these items. I recently learned about Vent-Matic faucets and had the very cool opportunity to chat with the owner of the company. Besides sharing a remarkably fascinating story, he sent me some faucets to review… these ain’t your mama’s typical tap! > **[Product Review | Vent-Matic Ultra Flo Faucets](https://brulosophy.com/2015/10/01/vent-matic-ultra-flo-faucets-product-review/)** > > \*THIS PRODUCT HAS BEEN DISCONTINUED\* Author: Marshall Schott I’m pretty cheap when it comes to (everything) homebrewing equipment, preferring to balance price with quality rather than spendin… ---
**Author:** ![AmandaK](https://avatars.discourse-cdn.com/v4/letter/a/df705f/32.png) [@AmandaK](https://forum.homebrewersassociation.org/u/AmandaK)\ **Post date:** [October 1, 2015, 12:44pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/2 "2015-10-01T12:44:49Z")
I do wish that these were available when we were building the bar (club down the road was doing a large buy, but it always fell through for one reason or another - for like a year or more) but I gotta say, the 650SS ain’t a bad choice either. ---
**Author:** ![klickitat\_jim](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/klickitat_jim/32/6601_2.png) [@klickitat\_jim](https://forum.homebrewersassociation.org/u/klickitat_jim)\ **Post date:** [October 1, 2015, 12:46pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/3 "2015-10-01T12:46:10Z")
This part gave me flash backs " I recall once coming home after 2 short days away, stoked to pull a pint of something I’d brewed, only to find myself struggling like the dickens to get the damn thing to budge! I pulled so hard, I had to brace the entire kegerator, and even then, nada" One time the plastic tap handle snapped off in my hand. When I reordered good tap handles I included two Perlicks. When those wear out, I’ll look at these new ones ---
**Author:** ![jonhughey\_att.net](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/jonhughey_att.net/32/6277_2.png) [@jonhughey\_att.net](https://forum.homebrewersassociation.org/u/jonhughey_att.net)\ **Post date:** [October 1, 2015, 12:49pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/4 "2015-10-01T12:49:47Z")
Thanks for the write up, Marshall. I’m happy with my Perlicks, but the next time I buy I’m definitely open to try them. ---
**Author:** ![blatz](https://avatars.discourse-cdn.com/v4/letter/b/4da419/32.png) [@blatz](https://forum.homebrewersassociation.org/u/blatz)\ **Post date:** [October 1, 2015, 1:07pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/5 "2015-10-01T13:07:49Z")
FWIW, they aren’t ‘new’ - i’ve had mine for about 10 years now.  The owner had some production issues and IIRC a spat with Perlick, which caused them  to be off the market for a long time. I love my VMs.  I have most of the available spout sizes, though most of my beers use the standard 10mm. Glad to see Brad is back in action! ---
**Author:** ![goschman](https://avatars.discourse-cdn.com/v4/letter/g/e495f1/32.png) [@goschman](https://forum.homebrewersassociation.org/u/goschman)\ **Post date:** [October 1, 2015, 1:35pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/6 "2015-10-01T13:35:20Z")
Where can these be purchased? I don’t find much info on the google machine. I probably can’t afford them but am curious how the price compares to Perlicks. ---
**Author:** ![Village\_Taphouse](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/village_taphouse/32/9914_2.png) [@Village\_Taphouse](https://forum.homebrewersassociation.org/u/Village_Taphouse)\ **Post date:** [October 1, 2015, 3:52pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/7 "2015-10-01T15:52:02Z")
Marshall, I mentioned in our FB group that I have all Ventmatics (the 2-piece Ultraflo model) and then I put 8mm spouts (made by the guy who runs Centerline… he is a local homebrewer/fabricator and I have been our drinking beer with him many times) on all 4 taps.  I really like the pour I get with the 8mm spouts.  The larger 10-12mm spouts seemed to give me a hollow pour occasionally.  He also built the 8mm spouts so that the spout fills with beer and comes to the bottom of the spout when you turn off the faucet.  This makes the beer all come to the bottom of the spout (I think he just beveled it a little at the opening) and drain into the glass at the end of the pour.  No more “beer-dribble” 30 seconds after you turn off the faucet.  Great stuff and awesome to see Ventmatics back. ---
**Author:** ![BrodyR](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/brodyr/32/8016_2.png) [@BrodyR](https://forum.homebrewersassociation.org/u/BrodyR)\ **Post date:** [October 1, 2015, 5:31pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/8 "2015-10-01T17:31:46Z")
> [@goschman](#): > > Where can these be purchased? I don’t find much info on the google machine. I probably can’t afford them but am curious how the price compares to Perlicks. There’s a link that takes to you to the site at the end of the brulosophy review: [http://www.vent-matic.com/#!/c1nab](http://www.vent-matic.com/#!/c1nab) Looks like just over $50 depending on finish ---
**Author:** ![BrodyR](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/brodyr/32/8016_2.png) [@BrodyR](https://forum.homebrewersassociation.org/u/BrodyR)\ **Post date:** [October 1, 2015, 5:34pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/9 "2015-10-01T17:34:41Z")
I’ve been in the market for a new faucet - currently rocking a shitty one that came with the kegerator and a nitro tap I recently bought. I was going to target the 650SS Flow Control, I’m assuming the vent-matic doesn’t have that feature but to be honest I’ve never used it. Is it a big impact? ---
**Author:** ![69franx](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/69franx/32/10699_2.png) [@69franx](https://forum.homebrewersassociation.org/u/69franx)\ **Post date:** [October 1, 2015, 5:51pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/10 "2015-10-01T17:51:32Z")
Still bottling here, but thanks for the write up Marshall. When I make the witch to kegging I will be looking into these for sure ---
**Author:** ![toby](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/toby/32/12343_2.png) [@toby](https://forum.homebrewersassociation.org/u/toby)\ **Post date:** [October 1, 2015, 8:17pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/11 "2015-10-01T20:17:13Z")
Wow.  Blast from the past.  I switched to Perlicks when I used my Bowie Bottlers (since switched to a beer gun), but I always loved my Shirron/Ventmatic faucets.  I need to start stocking up while they’re still around, just in case. ---
**Author:** ![Village\_Taphouse](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/village_taphouse/32/9914_2.png) [@Village\_Taphouse](https://forum.homebrewersassociation.org/u/Village_Taphouse)\ **Post date:** [October 1, 2015, 8:54pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/12 "2015-10-01T20:54:46Z")
> [@toby](#): > > Wow.  Blast from the past.  I switched to Perlicks when I used my Bowie Bottlers (since switched to a beer gun), but I always loved my Shirron/Ventmatic faucets.  I need to start stocking up while they’re still around, just in case. I think so too.  I wonder if I should pick up 2 of these for “safe keeping” or if I should replace my 4 current (older model) Ventmatics with these and then keep the _OLD_ ones for safe keeping.  Very tempting especially when Marshall mentions how it magically improved the head on his beer. ---
**Author:** ![brulosopher](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/brulosopher/32/12585_2.png) [@brulosopher](https://forum.homebrewersassociation.org/u/brulosopher)\ **Post date:** [October 2, 2015, 2:56am UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/13 "2015-10-02T02:56:02Z")
> [@goschman](#): > > Where can these be purchased? I don’t find much info on the google machine. I probably can’t afford them but am curious how the price compares to Perlicks. [www.vent-matic.com](http://www.vent-matic.com) > [@BrodyR](#): > > I’ve been in the market for a new faucet - currently rocking a s\*\*\*ty one that came with the kegerator and a nitro tap I recently bought. > > I was going to target the 650SS Flow Control, I’m assuming the vent-matic doesn’t have that feature but to be honest I’ve never used it. Is it a big impact? I’ve never used the 650 series Perlicks, but if you check the Brülosophy FB page, you’ll see Colin Kaminski has had nothing but problems with his. > [@toby](#): > > Wow.  Blast from the past.  I switched to Perlicks when I used my Bowie Bottlers (since switched to a beer gun), but I always loved my Shirron/Ventmatic faucets.  I need to start stocking up while they’re still around, just in case. I like your style. ---
**Author:** ![mainebrewer](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/mainebrewer/32/19_2.png) [@mainebrewer](https://forum.homebrewersassociation.org/u/mainebrewer)\ **Post date:** [October 2, 2015, 10:37am UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/14 "2015-10-02T10:37:10Z")
Great to see the Ventmatics are back in production. I got the last of my five faucets just before they went out of production. ---
**Author:** ![case\_thrower](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/case_thrower/32/5642_2.png) [@case\_thrower](https://forum.homebrewersassociation.org/u/case_thrower)\ **Post date:** [October 2, 2015, 5:54pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/15 "2015-10-02T17:54:33Z")
I’m a long way away from a kegerator but curiosity is getting the better of me.  What’s a ‘hollow pour?’ ---
**Author:** ![pgowan](https://avatars.discourse-cdn.com/v4/letter/p/3bc359/32.png) [@pgowan](https://forum.homebrewersassociation.org/u/pgowan)\ **Post date:** [October 2, 2015, 6:19pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/16 "2015-10-02T18:19:54Z")
> [@brulosopher](#): > > > [@goschman](#): > > > > Where can these be purchased? I don’t find much info on the google machine. I probably can’t afford them but am curious how the price compares to Perlicks. > > [www.vent-matic.com](http://www.vent-matic.com) > > > [@BrodyR](#): > > > > I’ve been in the market for a new faucet - currently rocking a s\*\*\*ty one that came with the kegerator and a nitro tap I recently bought. > > > > I was going to target the 650SS Flow Control, I’m assuming the vent-matic doesn’t have that feature but to be honest I’ve never used it. Is it a big impact? > > I’ve never used the 650 series Perlicks, but if you check the Brülosophy FB page, you’ll see Colin Kaminski has had nothing but problems with his. > > > [@toby](#): > > > > Wow.  Blast from the past.  I switched to Perlicks when I used my Bowie Bottlers (since switched to a beer gun), but I always loved my Shirron/Ventmatic faucets.  I need to start stocking up while they’re still around, just in case. > > I like your style. I have two of the Perlicks with flow control and have had no issues.  Just a different story; I’m not trying to say Colin is wrong. ---
**Author:** ![toby](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/toby/32/12343_2.png) [@toby](https://forum.homebrewersassociation.org/u/toby)\ **Post date:** [October 2, 2015, 7:25pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/17 "2015-10-02T19:25:34Z")
> [@case\_thrower](#): > > I’m a long way away from a kegerator but curiosity is getting the better of me.  What’s a ‘hollow pour?’ Basically where the beer comes out of the tap along the sides of the faucet and leaves a ‘hole’ or ‘bubble’ in the center.  It effectively looks like a tube instead of a solid stream. ---
**Author:** ![case\_thrower](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/case_thrower/32/5642_2.png) [@case\_thrower](https://forum.homebrewersassociation.org/u/case_thrower)\ **Post date:** [October 2, 2015, 8:31pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/18 "2015-10-02T20:31:49Z")
> [@toby](#): > > > [@case\_thrower](#): > > > > I’m a long way away from a kegerator but curiosity is getting the better of me.  What’s a ‘hollow pour?’ > > Basically where the beer comes out of the tap along the sides of the faucet and leaves a ‘hole’ or ‘bubble’ in the center.  It effectively looks like a tube instead of a solid stream. Yeah, I can see where that would not be the most desirable thing.  Thanks. ---
**Author:** ![system](https://us1.discourse-cdn.com/brewersassociation/original/1X/f1a2211dcb353b921ed70873794a31db2031eccc.png) [@system](https://forum.homebrewersassociation.org/u/system)\ **Post date:** [October 3, 2015, 9:32pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/19 "2015-10-03T21:32:45Z")
Yes, these are great faucets.  I bought some not from the original run but when Shirron was briefly making them 7 or 8 years ago.  I also like the removable spouts… I can clean them as well as use narrow or wide spouts for different carbonation levels. ---
**Author:** ![alestateyall](https://sea1.discourse-cdn.com/brewersassociation/user_avatar/forum.homebrewersassociation.org/alestateyall/32/21186_2.png) [@alestateyall](https://forum.homebrewersassociation.org/u/alestateyall)\ **Post date:** [October 4, 2015, 4:06pm UTC](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177/20 "2015-10-04T16:06:19Z")
I am a cobra tap user for years, but, have been considering building a kegerator. Forgive my ignorance; why does the removeable tip make cleaning easier? It seems you still need to clean up inside the portion of the tap that is not removeable. [Next page](https://forum.homebrewersassociation.org/t/vent-matic-ultra-flo-faucets-product-review/21177.md?page=2)