I just kegged an amber ale last night and noticed an unusual problem - there is a sharp bitterness in the aftertaste and at the back of the tongue. I am wondering what it is and what I should do. The bitterness is a little like a hoppy beer with way too much suspended yeast - sharp like that. Otherwise the beer is perfect - crystal clear, wonderful aroma, excellent head retention.
My process for this beer:
I brewed it per usual - batch sparge with a fairly fine crush and about 84% efficiency (recipe below). After 3 weeks in primary, I cold crashed and racked onto dry hops. I gave it 12 days and then cold crashed and hit it with gelatin. Then I wasn’t able to get to it for 5 days before racking. The gelatin worked - beer is incredibly clear, but I am wondering if the cold temp with the dry hops could have done it.
Recipe: Education Amber Ale
Style: 10B-American Ale-American Amber Ale
Recipe Overview
Wort Volume Before Boil: 14.50 US gals
Wort Volume After Boil: 12.00 US gals
Volume Transferred: 10.00 US gals
Water Added: 1.00 US gals
Volume At Pitching: 11.00 US gals
Final Batch Volume: 10.50 US gals
Expected Pre-Boil Gravity: 1.049 SG
Expected OG: 1.054 SG
Expected FG: 1.011 SG
Expected ABV: 5.7 %
Expected ABW: 4.5 %
Expected IBU (using Tinseth): 37.6
Expected Color: 11.5 SRM
Apparent Attenuation: 79.4 %
Mash Efficiency: 84.0 %
Boil Duration: 90.0 mins
Fermentation Temperature: 58 degF
Fermentables
Canadian Pale Ale Malt 12lb 0oz (51.9 %) In Mash/Steeped
UK Pale Ale Malt (Maris Otter) 5lb 0oz (21.6 %) In Mash/Steeped
German Munich Malt 4lb 0oz (17.3 %) In Mash/Steeped
UK Medium Crystal (120EBC) 2lb 0oz (8.6 %) In Mash/Steeped
German Carafa Special II 2.00 oz (0.5 %) In Mash/Steeped
Hops
US Magnum (17.0 % alpha) 14 g Loose Whole Hops used 60 Min From End
US Simcoe (11.0 % alpha) 58 g Bagged Pellet Hops used 15 Min From End
US Centennial (11.0 % alpha) 113 g Loose Whole Hops used 5 Min From End
US Centennial (11.0 % alpha) 113 g Loose Whole Hops used At turn off
US Centennial (9.0 % alpha) 85 g Loose Pellet Hops used Dry-Hopped
Your efficiency is quite high. There could always be the possibility that the beer was oversparged. I assume you haven’t noticed this with your other beers?
I’m more inclined to believe that the bitterness perception is from polyphenols from the dry hopping.
Two things come to my mind. 1) Over Carbonation. An overcabronated beer enhances bitterness and makes a sharp bitterness bite. 2) The mineral content of your water. If you water changed suddenly, and you are used to putting, say, 10 gms of Calcium Sulfate into your mash, that can mess your bitterness us big time depending on what has changed in your water.
My water changes constantly, which makes like some what difficult.
Like major said, I think it’s likely a carbonic bite that is causing the perception of bitterness. Also the combination of a low final gravity with carafa special II dark malt might enhance the bitterness. Too much calcium carbonate might also give that sharp back of the tongue astringent bitterness.
I had some Columbus that caused hop astringency to a couple of batches. The first one I only used .25 oz of it to dry hop. The beer did get better with age (scored 35 in a recent comp.) The other one was a APA and that I only dry hopped half of. One half is still not drinkable. The other is gone. I tossed the rest of those hops in the trash.
Well, the water here is fairly high in bicarbonate. I added no salts to this mash or boil, but I did use some 5.2. I haven’t had this problem before and have made similar-colored beers. I often add a lot of gypsum to my mash in order to effect a “Burton” profile (rather than carrying 20 gallons or RO water upstairs to my apartment). I use my water unmodified for darker beers all the time. My city water report is:
The bicarbonate content is fairly high, but I might be most concerned with the magnesium level with regard to that profile. It’s really high. I know a higher than desirable amount of magnesium can lead to unwanted flavors, but I can’t remember if it’s a harsh bitterness or something else.
Regardless, I have brewed many beers with this water and haven’t had this problem. However, having just had another taste, I can say two things: one, the beer (which I shake-carbonated yesterday) is taking longer than usual to be properly pourable (still all foamy) and two, the sharp bitterness has GREATLY reduced in the last 18 hours. That leaves me to believe that the problem has something to do with the keg (which a buddy cleaned and sanitized for me) or the lines (which I just ran warm starsan through before tapping this keg). Either way, if the problem is going away, I am happy. I am also happy that I will be moving to Oakland or Berkeley in July where the water is soft and easy to brew with.
Do you batch or fly sparge? If you fly sparge do you acidify the sparge water to 6pH or below? I’m thinking you may have extracted tannins from the husks. This would only apply if it is an astringent type bitterness like sucking on a used tea bag(opens this up for some jocularity :o )