I just got a Kegerator. I want to pour Guinness Stout and I purchased the Nitro Regulator and the keg coupler from Kegerator. Where would I purchase a 20 cu. ft Nitro tank for this process? How much should I expect to pay? What is the proper Pressure I should set the regulator at? I was told I can use CO2 but after drinking many a pints in Ireland I prefer to try to keep the experience as original as possible.
thank you for your help on this one.
I might be mistaken, but I believe a special faucet is needed also. As far as the gas, you might find the gas at a welding supply shop. Or, you might try asking your local beer distributor.
Yes, you need a special faucet to dispense beer on beer gas.
Regarding purchasing beer gas, my local welding shop will fill cylinders of it for me. You just need to tell them the mixture of CO2 to N2 which I don’t recall at the moment. They will fill it by weight.
You’ll find all you need to know and then some in the Brewers Association Draught Beer Quality Manual which you can download from this page: http://www.draughtquality.org/
I have not read this, but I certainly hope this does not include the same rubbish presented to the homebrewer from AHA in Zymurgy and on their website. I apologize for the negative tone but despite what one would expect, the AHA (and therefore by extension the BA) is not a very reliable source of accurate information. I’d double check their info with a more reputable source.
I’m not sure what specific information you refer to in Zymurgy, but I do share your cautious approach to it and the AHA website based on on past experience. But the DBQM really is the reputable (professional, not homebrew) resource for all things draught. It should provide a solid foundation for this topic, mixed gas dispense presenting as it does a number of peculiar and potentially expensive challenges, above and beyond normal (homebrew or other direct draw) draught systems.
Well, it’s all been posted on here but let’s see… there was the article on kegging repeated from the 90(s) or so that had outdated info in it (which is what I was referring to above), then there was the article on Scottish Ale that Ron P pointed out all sorts of inaccuracies, and there was the jacked up info (was it this month?) that our crew in the edit dept pointed out… I’m sure there are more but that ought to get you started if interested. They are developing (or have developed depending on your perspective) a reputation for inaccurate information. Which is a shame really because in my opinion (as I’ve said and took a cpl shots for before) they should be the go-to source for Homebrew info.
^^^^
BrewBama, those are just the things (some of them at least) that have made me wary. But the BA to their credit are separate from the AHA and Zymurgy (which since taking on Gordon Strong as technical editor we may hope will be more reliable.) The DBQM was prepared with the help of a body of commercial brewers and other industry partners to ensure best practices in the beverage trade. I assume that the BA is generally a reliable source of technical support to the brewing industry. But I should note that the rote perpetuation of misinformation happens even on the professional level, probably in every field. No excuse, but. I recall that I was floored a few months back by a study promulgated by the MBAA showing that iodophor was basically useless. Then someone here on the forum pointed out that the whole study depended on fundamentally flawed methodology, a real schoolboy mistake. We can be appalled, but we can also serve as a corrective.