I’m sure this question gets asked a lot in various ways, but I’m taking steps to improve my process and wanted some feedback. I’ve been brewing ales for a number of years now and when it comes to primary fermentation I use my basement, where ambient temps are typically in the low to mid 60s. I know that fermentation can raise the temp of the beer by 5 degrees (give or take a few degrees) but I’ve never seen the temp strips on my fermentors above 71 at the highest and most often it’s in the 60s. So I’m hesitant to go looking for a spare fridge and shelling out 50 to 100 bucks for a temp regulator for my fermentations. But, it seems like temp control is the most universally pushed “improvement” a homebrewer can add to their process. Should I be looking at temp control, regardless of basement good fortune?
I’m most likely the cheapest, most ghetto brewer in the entire nation, but… even if I wasn’t, I couldn’t see shelling out any dough at all for a temperature controlled system if I was happy with the ales I was making in my basement in the low 60s.
I am, and appreciate the perspective since I’m not looking to shell out cash without need. I’ve just read so much about the importance of temp control in fermentation recently that I wanted to make sure I’m not missing the boat.
I ferment most of my ales on my cellar floor which ranges in the 60’s throughout the fall/winter/spring months without temp control. The temp varies +/-1 degree on any given week. I have been very pleased with the quality of my beer. I think the most important thing to keep in mind is the taste of your beer as percieved by you. If you are happy with your beer then I wouldn’t look into improving your fermentation temp control. If you can consistently keep your ale fermentations in the 60’s +/- a couple of degrees then I wouldn’t change the process.
I like to brew any and all styles whenever I want. I don’t want to have to wait till summer to brew a saison or winter for a lager. So it was worth the hundred bucks or so it cost to build the Son-of-Fermentation chiller box. I’ve outfitted mine to do heating as well, so I’m all set.
You guys should start a new thread. “Show us your ghetto brewery” ;D
[/quote
I particularly like the fact that denny’s not embarrassed to show us his rusty old hose clamps. Every time I see a picture of his set-up I think I need to send him a new clamp or two. Maybe some new hoses.
That’s funny. About 20 years ago, I remember a local Chinese restaurant getting closed down by the health inspectors because that’s how they were shredding their cabbage. Yeah, you could do all this chopping and boiling and whatnot, or you could put it in a duffel bag and run it over with your Buick. That’s pretty much how it was reported on the news.
For most ales, it sounds like you’ve already got good temperature control. As long as the temperature doesn’t swing too much and you’re happy with the beers you’re brewing, why change things?
If you’re worried about temperature rising too much you can use a swamp cooler. If you’re worried about temperature swings, you can created an insulated box to put over your carboy.
The only reason I see for going to the expense of extra appliances and temperature controls is if you’re wanting to go beyond ales and brew styles where you need either a chilly fermentation temperature and/or a period of cold conditioning.