I’m brewing my first sour this weekend. Using the Berliner Weiss recipe in Classic Styles. I am concerned about sanitation. I would rather not dedicate equipment to sours; especially since this is my first one, based upon results might be my last. Seems like a waste to buy double equipment at this point for anything that is in contact with the bugs. I would think as long as I clean with PBW and use StarSan as directed bugs will die. Isn’t that why we use a santizer to kill all the bugs out there? If santizers didn’t work wouldn’t we all have sour beer results just from the stuff in the air that lands on equipment? I just wonder if we all might be paranoid about the ability of these bugs to survive StarSan. I did a search for sour sanitation on the forum but didn’t really get an answer from anyone that has experience just cleaning and santizing rather then have dedicated equipment. If there is someone out there that has or is just cleaning and sanitizing please speak up and let me know your experieince.
The specific type of lacto traditionally used in Berliner Weiss is inhibited by IBU levels of 10 and higher. If the beers you brew are generally much higher than 10 IBUs then I wouldn’t worry about it if you are using the appropriate lacto. Sorry I can’t remember the appropriate type of lacto.
And a thorough cleaning regimen will suffice! However I would recommend using glass as opposed to plastic for sour beers. I do have dedicated equipment for sour beers but that consists of 2 5 gallong glass carboys as I only make 10 gallons of lambic a year and they have to sit on the bugs for 18 months anyways…so may as well dedicate the 2 carboys to it. When those come out I brew another.
really you are talking about some racking hoses which should be replaced every once in a while anyway. a bucket, and it never hurts to have an extra. and maybe a racking cane so it’s not really double equipment. you can use the same kettle and mash tun etc. if you use glass fermenters you don’t have to dedicate those and even if you use plastic it’s an insurance issue more than a have to issue. worst case if you don’t dedicate a plastic bucket is that the next batch of non sour beer turns sour and then you have to get a new bucket. I would get new racking tubes after you sour or after you accidentally infect the next non sour anyway.
Thanks for the input so far. I’m not really concerned about racking hoses since I only use them once. I can afford an extra racking cane. I guess my concern is with kegs and keg tubing. Also, I use Better Bottles but have enough to dedicate one or two to sours. I have glass carboys for long term fermentation if needed (oaking, souring, etc…).
I just was at my LHBS. I asked this question while picking up the WLP630 vial for this beer. The input I got was not to worry about Lactobacillus and Pediococcus because good cleaning and StarSan will kill those bugs off; however, Brettanamyces is not so easy to kill and I need to dedicate equipment to Brett if I’m using it. I also have been thinking about this…if everyone seems to dedicate equipment to the “bugs” then to avoid cross contamination wouldn’t you want dedicated PBW and StarSan? Is this an issue everyone misses and they’re just cross contaminating anyway? It goes back to my original thought why dedicate anything to sours if PBW and StarSan should be cleaning and sanatizing all of these bugs anyway? If StarSan can’t kill these bugs then aren’t we all wasting money on it? I’m not about to stop using it, just thinking out loud and hoping for someone with experience not dedicating equipment to sours to speak up with their thoughts or experience. Thanks for the input and keep it coming.
Your LHBS is wrong. starsan is very effective at killing brett, you don’t have anything to worry about sanitizing a clean non-porous surface. If starsan didn’t work on brett, every beer you make will have a brett contamination. It’s everywhere, all around us, living in my yard right now.
The lactobacillus found in Berliner Weiss is different than the lactobacillus found in Lambics. I believe Wild Brews has a description of the two types. The one for Berliner Weiss is inhibited by 10+ IBUs and feeds only on glucose (homofermentative) while the one for lambics is not inhibited and is heterofermentative (e.g. can eat dextrins left behind the yeast).
While good sanitation practice is a good idea in and of itself, you don’t need good sanitation practice to eliminate infections from the Berliner Weiss lacto; you just need enough hops.
Cleaner and sanitisers will do the job on surface where they can get.
One place of concern is where hose meets barb adapter.
Take it apart and check it if you have any residual dirt / sediment there.
That is where the bugs would be hiding.
This is why you would have second set of hoses for sour beers.
If you are talking about the souring needing many years before it is notice then we are in agreement. Lactobacillus delbrueckii, the type used in Berliner Weiss, is an insignificant threat to spoil beer because it only eats glucose which is rapidly depleted during fermentation and because it is inhibited by hop levels over 10 IBUs.
Thanks for all the great info. I really enjoy drinking sour beers but never made one due to concerns over cross contamination. I thought an easy beer to get started with would be a Berliner Weisse. If all goes well I would like to try a Flanders Red next. I started this thread because there isn’t alot of info on sanitation for sour beers out there. Everyone seems to agree I should have separate equipment. As Tom mentioned before these bugs are all around us. As such we use sanitizers to neutralize them when we follow good sanitation. No one has really explained why you can’t just sanitize to kill the bugs as opposed to using seperate equipment. I was hoping someone would come forward that follows sanitizing rather then duplicate equipment. I know anything that can get scratched can harbor bugs; but what about PET bottles (Better Bottles), glass or stainless steel. Do I have to dedicate a keg to sour beer or can it be cleaned and sanitized? For all sour beers (not just Berliner Weisse) can the bugs and yeast transfer to another piece of equipment if a “sour” piece of equipment is soaking in the same PBW as the “non-sour” equipment? Will StarSan kill the bugs if they cross contaminate a piece of equipment while in PBW?
Don’t worry about cross contamination in PBW or starsan, as long as you can tell the bits apart. If the o-rings are in good shape you don’t need a separate keg for sours, but if they are ratty you should replace them anyway. You can always just have a “sour” set of o-rings, the stainless will sanitize just fine.
You don’t need different glass or metal fermenters, it is really just the plastic bits you need to worry most about. You can probably get away with using them all for any kind of beer and just following good sanitation procedures, but I don’t think it’s worth risking a batch when you can just have a separate plastic hose, stopper, and airlock. And realistically, since I generally add the bugs in secondary, the only thing I worry about is the racking hose (the cane is stainless).
I suppose you could call me the Pigpen of sours. I’m in the minority with my opinion, but I have made probably a dozen or more sours and I have reused plastic fermentors with no signs of contamination in subsequent batches. Its my understanding that wild yeast and bacteria are susceptible to the same cleaning sanitizing regimens that we normally use. I let my PBW solution sit in the fermentor for a good long while, and use Starsan as well. Its possible that there is an increased risk associated with this practice, but my experience is that it is definitely not a certainty that you’d get an infection from reusing a plastic bucket. I do have a dedicated autosiphon, just because I was following conventional wisdom in the beginning and I already have a couple more now for other beers.
Its not a huge outlay to have a dedicated bucket and racking cane, if it makes you feel better. A lot of the stuff we do by way of cleaning and sanitizing, is more a matter of comfort level than hard fact. Sanitization, by definition, isn’t a really absolute deal.
Cost isn’t my main concern. My main concern is just keeping track of dedicated kegs and equipment. I don’t want to accidentally use the wrong keg or something and ruin a perfectly good beer.
I use PBW then about a gallon of boiling water, and then starsan to clean kegs that have had bugs in them. The boiling water might not be necessary but to me it makes sense to kill them with 2 different methods!
For hard plastic, you can always score or stamp the exterior with a hot knife. For soft plastic or metal, just stick a piece of duct tape or electrical tape to the outside.
Im not familiar with the recipe you are using, but did you pitch any additional lacto or “bugs” after you chilled? If not, then the bugs would have been pasteurized during the boil and you have no need to stress anything else. My understanding was that berliners are mashed for 24-48 hrs and then boiled…so they still impart the sour flavor and lower the pH but the lacto that was on the grain is killed off during the boil. What did your recipe call for?
If you did pitch more bugs, I would treat it all that post wild pitch as wild from that point on. The pros do.