I brewed a high gravity (1.078) biere de garde and after two weeks in the primary the gravity has only dropped16 points. This recipe has 12 oz. of sugar and I usually see an explosive fermentation, but that never occurred. I did all the usual things for a high gravity beer: 2 qt starter, aerated with a stone, proper temp (68-70). So, I’m kind of flummoxed. I brought the carboy upstairs (temp 72), stirred and rocked it, and after 24 hrs. not seeing much of anything (although it’s chugging along slowly). Would adding another round of a neutral yeast help? Should I make another starter for that?
Give me your ideas, please.
Art
patience.
are you measuring with a hydrometer or a refractometer?
What’s the recipe? What yeast? How’s it taste?
I’m curious, too, if you are using a refractometer and not making the proper calculation.
I think I messed up in responding to the replies. Anyway, long story short. I used a Saison yeast. Measured with a hydrometer, and have kept the fermentation temp at 68-70F. Going back over the recipe, it says the temp should be 70-75F. So, the original question was, should I repitch using the same type of yeast, or a neutral yeast? Will that do me any good?
Are you using wy3724? If so get it into the low 80’s and it will get there.
What strain? Some saison strains need it hot and others really just chug along, like up to 4 weeks ever so slowly.
I think if you can get it into the 80’s the yeast will wake up and get going for you:)
+1. If he used 3724, that would explain the stall for sure. BTW,Wyeast now recommends 90F for 3724 to avoid the stall.
I’ve heard of using a aquarium heater with carboy in water to raise the temp. Any other methods to get to an 80 degree temp?
Thanks
I have a ferm chamber and use a 95 watt bulb in a coffee can hooked up to a controller, easily heats and holds up to 95oF.
The aquarium heater in water works well too but into the low 80’s is my experience in the past. Heating pads and reptile heaters can also be used as well as ferm wraps and brew belts but all those will require a temp controller
I use a reptile heater, which is basically ferm wrap at half the price and twice the longevity. You definitely need a temperature controller. I have taken it up to 105 but I’m sure it goes hotter so I wouldn’t use anything like that without a temperature controller.
An aquarium heater is probably your easiest option if you want to roll with the yeast you have. Otherwise you could pitch a different strain.
…so, what did you do?
What temperature are you fermenting at? How’s the beer look? How does it smell?
What size/wattage reptile heater are you using? Do you have it at the bottom of your ferm chamber/freezer or mounted to the side? Also, what size chamber are you using. I have a 7.2Cf chest freezer and 2 Johnson control units that i can use for heat and cooling. Just wondering what size pad to get. I ran into an issue recently with 2 batches fermenting in same freezer, with 1 ferm wrap: The one without the ferm wrap, which had a 2 week head start, has stalled probably due to low temps. So i would like to just have heat for the whole unit the next time I need 2 fermenting at once. Any thought would be appreciated