Hi all!
I recently brewed a cocoa stout. problem is attenuation is too low : 55%
any insights? here are the specs:
OG: 1.062
FG: 1.028
1st fermentation : 2 weeks at 70F, 2nd : 1 week at 70F. attenuation didn’t change from racking.
yeast used : WLP036 dusseldorf (altbier) close to the expiring date, though well kept in fridge.
2 litres starter 18 hours prior to pitching for a 40L batch, which perhaps wasn’t vigorous enough - though the actual fermentation seemed to be quick and sufficiently vigorous.
oxygenation of the wort was just as usual.
mash procedures: too hot at first (80 celcius) and brought back to 67 celcius with the addition of cold water after 15 minutes. perhaps denatured too many enzymes (to break down long chain sugars), thus not enough fermentables and too many unfermentables in the wort? though the conversion with the iodine test was OK after 90 minutes of mashing…
HELP!
Thanks ahead!
I’d say that 80C (167F) denatured all of the Beta enzymes and a lot of the Alphas, which would give you a lot of unfermentable wort and a high finishing gravity.
70F is pretty warm for fermenting, btw.
Did you measure the gravities with a hydrometer or a refractometer? I ask because alcohol will not allow an accurate reading with a refractometer after fermentation has begun.
That really tells you virtually nothing.
+1
Mashing at 80C could be a problem especially for 15 min.
+2 Hey, I’m into “cheap and easy” posts today. 8)
hydrometer. that’s what I thought too about the enzymes but since the fermentation started well, I guessed it was OK.
mind me asking…why?
or should I say: what is the purpose of that test then?
thanks!
another: do you think that the wort is going to be especially hazardous to bacterial contamination - or other buggers?
and also, any idea about what to do with the wort before bottling?
it does taste pretty good! and surprisingly not overly sweet!
thanks
No worries. If you like the taste, drink it up.
The last beer I did that to (high initial mash temp) I gave up on the yeast and added brett to it. It’s getting nicer all the time. (See my photo on the “show us your pellicle” thread.)
A negative iodine test (if it’s done correctly, which is a big “if”) tells you that there are no starches left in the wort. It doesn’t tell you anything about what kind of sugars you’ve created. I think that’s what Denny was getting at, anyway.