Finally pulled the trigger on a chest freezer! Been wanting to try my hand at lagers for a long time, but of course I’ve got some questions…
I plan on buying a bulk bag of pils malt. I know WORT-H.O.G. advocates Best Malz, and I know a few other folks do as well. Any suggestions?
I know this isn’t the equipment section, but any advice on temp controllers? I could build my own, but part of me wants a COTS solution.
Most importantly, what should I brew first? I have a pack of WLP835 German Lager X from the recent Vault release. Clearly a higher gravity brew wouldn’t be wise, and I’m thinking the opposite end of the spectrum holds issues as well. I’m thinking Boh Pils, Marzen, maybe a vienna lager? Any other thoughts/suggestions?
I’d also like to respectfully ask that people ignore attempts to drive this off topic, and not respond to any problematic posts.
The 835 works really well for a bigger Helles, Dunkel, or Doppelbock. Those are what Andechs is known for. It might do OK in a German Pils. I don’t know if I would use it for a Czech Pils. Märzen would be Good.
Phil, I just made my first lager successfully and have another in the fermenter. I posted the same topic “first lager” under recipes and got some great responses so check that out.
About the chest freezer: I learned that I could make it run at fridge temps with an adjustment to a screw behind the temp control knob. There is a thread in kegging and bottling about that that is recent, I think it’s about fridges. It’s a pia for me to do links on the device I’m on, if you can’t find these threads I’ll grab the links when I’m on a PC. Long story short the temp control trick is easy but requires patience to adjust, wait for temp change, re adjust etc.
You already have the skills so I don’t think you’ll have a problem. Bigger starter, more aeration, lower temp, more time. Good luck!
Here’s the links: https://www.homebrewersassociation.org/forum/index.php?topic=26048.0 https://www.homebrewersassociation.org/forum/index.php?topic=25984.15
I brew German lagers typically, but I’m not much help on malts. I use whatever my LHBS has, and they switch between Avangard, Best and Wyermann at times. I’d advise reading up on some of the differences in pH with these, as I’ve found some maltsters product to require less acid addition (or end up with too low pH).
As for controllers, I have two. The Ohmbrew Automations Fermostat is nice, but I find I don’t use the programmable features as much as I thought. So basically I overpaid for what I use it for.
I bought a BrewPi a few months ago and I’m having a lot of fun with that. I can connect to my controller over the Internet and start allowing my temp to rise when I see the heat generated by the fermentation backing off.
It’s a little bit of a chore to get it set up if you’re not a computer person, but there are great instructions out there and I like the ability to check in on things when I’m not home.
I forgot to suggest a style. With summer around the corner something like a Dortmunder Export might be nice. But if you really want to see what that yeast is all about maybe a Munich Helles would put it on display better?
I recommend reading up on Brulosopher’s quick turn-around for lagers. I’m making better lagers than ever in about the same time it takes an ale to be ready.
+1 to that. I first heard about this on the BN a few years ago, but Brulosohpy has done a great job testing it out and explaining specifics on how to execute it.
I’m not sure that I’ll do the screw adjustment on the freezer, if it’s not being used to brew it may get pressed into short-term food storage. It will be nice to have some “overflow” room for food when we’re preparing for a party, so I want to be able to revert back to “freezer” at the push of a button.
And the Auber looks perfect for that, I’ll probably go that route.
I know this gets rehashed on here all the time, but any suggestions for heating? I plan on putting two 6.5 gal glass carboys in the chest freezer, to ferment 10 gallon batches. What’s the best way to heat them both evenly? I’ve been using a heat pad, but that’s only good for one carboy at a time.
I haven’t been this stoked since I started brewing. I love lagers and kolsches, can’t wait to start brewing them!
I know that you have decided on a Pils for this first lager, and that’s fine. I’d throw out as alternatives for folks that are contemplating their first lager, try a Vienna Lager, a Marzen, or a Schwarzbier. This is from the standpoint of having a little bit more room for small flaws. You’ll get quick turnaround and a tasty beer, even if there are some small issues.
When my chest freezer gave up the ghost I replaced it with a standup as bending over to lift a full carboy out of the old one was getting to be less fun each batch.
I’m not committed to any particular type of lager yet, though I’m obviously not doing anything too strong. At the moment, I’d have to say that I’m leaning towards a Dunkel.
Yes, an upright freezer would have been a better option, but they are both more expensive and less useful for beer. Seems like everyone these days is integrating the freezer coils into the shelving, which prevents them from being used for brewing.