I plan on making my first Oatmeal Stout tomorrow and my LHBS was out of Flaked Oats. Can I just use Old Fashioned Oats and get the same results? Also, should I just add them in the mash?
Yes, add them to the mash. Beware of stuck sparges, tho, I recommend using some rice hulls to ameliorate this problem. I use 1 to 1 1/2 lbs of oats in my stouts, and add 1/4 lb of rice hulls. I usually used quick oats, or rolled oats, though flaked is good too. Just depends on whats available to me. They have all come out good.
Yep, just go to the grocery store and get the good ole Quaker Oats (the 5 or the 10 minute kind, not the instant). Usually comes in those 18 oz containers. I use the entire container in my Oatmeal Stouts.
That’s exactly what I was thinking and I was staring at the rice hulls - got distracted and forgot to buy them. I have used rye quite a bit and have never had a stuck sparge, so maybe I’ll be OK.
I’ve always been curious to see how much flavor you get from toasting the oats, so I tried it on a stout I made a couple weeks ago. It’s going into a keg tonight, so I’ll report back once it’s carbed. I used the Quaker oats and toasted them at 325 for just over an hour, until they were a golden brown.
So the results are in… The toasted oat flavor definitely comes through in the finished beer. I used a pound of oats, and tasted them before they went in the mash so I’d know what to look for later on. They give a slightly sweet, nutty kind of flavor to the beer. It’s a nice complementary flavor in a stout.
I toasted oats and entered a competition and judges noted the toasty/nutty oat flavor.
I always use Quaker and never buy flaked oats from the homebrew shop. I use ‘Old Fashioned’, not instant or quick. Of course, that’s also what I use to make oatmeal.
I use Quick Oats for my recipes that require oats. They are are broken into smaller pieces and are more readily dissolved in water. No cooking is required for quick oats, just toss them in the mash.
you are correct. When oats are rolled they are first steamed which gelatinizes the starch. You would have to do a cereal mash if you wanted to use whole oat groats or steel cut (pinhead) oats. but with malted or rolled oats of anykind you can just mash as usual.
I am tasting this Oatmeal Stout today from the keg and I have to say that this is probably the smoothest stout that I have ever made. I used 1.25 lbs of Old Fashioned Quaker Oats and I had no ploblem with the sparge. I think I might up the amount of oats next time and try the toasting method.
I buy the 9 pound boxes of oatmeal at Sam’s Club and use one of the 2 bags(4.5 pounds each) in a 10 gallon batch so I’m using 2.25 pounds of oatmeal per 5 gallon batch. It gives the wort a nice viscous texture that thins out after a 90 minute boil, and it does make a silky smooth beer. And I’m sure it’s great for my health, a bowl of oatmeal in every glass.
Absolutely right. Fact is, you can even use instant oats to brew with.
Old fashioned rolled oats and especially pinhead (aka steelcut) oats need to be well cooked first.
I don’t think they need to be. Only if you want to get the fermentables out of them, which isn’t really my concern. They’ll still impart their flavor/mouthfeel to the beer without cooking them first.